Emergency Lights Accessories

Emergency Lights Accessories

The Exit Light Company sells a full line of accessories to keep existing exit signs and emergency lights functioning like new. Replacement batteries (NiCAD and SLA), lamps (including MR16, sealed beam, and LED) & bulbs keep your emergency lights bright and operational. LED retrofit kits allow you to convert older incandescant bulb exit signs to energy-efficient LED exit signs. Emergency ballasts allow existing fluorescent lighting to used as emergency lighting. Polycarbonate shields and wire guards are avaialble to help protect exit signs and emergency lighting from external damage, including vandalism.

Batteries

The most common reason for exit sign or emergency light failure is an exhausted battery. Unfortunately, backup batteries do not work forever. Rechargeable batteries, after a while, lose their abilities to fully charge. To keep your signs and lights in compliance with the 90 minute backup required, a replacement battery is necessary. The Exit Light Company carries a wide variety of replacement NiCad batteries, 12 volt sealed lead acid batteries, 4 volt sealed lead acid batteries and 6 volt sealed lead acid batteries.

NiCAD Batteries

Sealed, rechargeable Nickle-Cadmium (NiCAD) replacement batteries. Available in a variety of voltages / amps and form factors.

SLA Batteries

SLA (Sealed Lead Acid) batteries are most often used in heavy duty or industrial emergency lighting units. The Exit Light Co. offers a wide range of maintenance free Sealed Lead Acid batteries in 4 Volts, 6 Volts and 12 Volts.

SLA Batteries 12 Volt

Maintenance free, non-spillable 12 volt sealed lead acid (SLA) replacement batteries. Used most often in heavy duty or industrial emergency lighting units.

SLA Batteries 6 Volt

Maintenance free, non-spillable 6 volt sealed lead acid (SLA) replacement batteries.

SLA Batteries 4 Volt

Maintenance free, non-spillable 12 volt sealed lead acid (SLA) replacement batteries. Used most often in heavy duty or industrial emergency lighting units.

Bulbs / Lamps

Exit signs and emergency lights come in all shapes and sizes. The Exit Light Company offers a wide selection of replacement 12 volt bulbs / 12 volt lamps, 120 - 130 volt bulbs / 120-130 volt lamps, 4 volt bulbs / 4 volt lamps, 6 volt bulbs / 6 volt lamps, sealed beam lamps and LED lamps to accommodate your emergency lighting needs.

12 Volt Bulbs

Give old emergency lighting new life with replacement 12 volt bulbs or lamps.

6 Volt Bulbs

Give old emergency lighting new life with replacement 6 volt bulbs or lamps.

4 Volt Bulbs

Give old emergency lighting new life with replacement 4 volt bulbs or lamps.

120-130 Volt Bulbs

Give old emergency lighting new life with replacement 120-130 volt bulbs or lamps.

Sealed Beam Lamps

Sealed beam lamps (which are also actually PAR lamps because of their parabolic aluminum coated reflector) are sealed units with the reflector, filament, and lens all-in-one. Keep existing emergency lights bright with replacement sealed beam lamps.

Emergency Ballasts

Adding an Emergency Ballast kit to your existing light fixture allows the fixture to operate in emergency mode for at least 90 minutes during a power outage. Our emergency ballast kits include an emergency battery, charger and inverter circuit. Use the chart below to find the ballast needed for your installation.

LED Retrofit Kits

By law, exit signs are to be illuminated during building occupancy. In practice, exit signs are "ON" 24-hours a day, 7 days a week. For buildings with older exit signs, which use incandescent or fluorescent bulbs or lamps for illumination, this leads to significant energy and bulb replacement costs. Consider replacing your older exit signs with newer, energy efficient exit signs which use light emitting diodes (LEDs) or light emitting capacitors (LECs) for illumination. Otherwise, to modernize existing exit signs, install a retrofit kit, which will update the outdated lighting in your older exit sign's to energy efficient LED lighting. Retrofitting your incandescent or fluorescent exit signs with LEDs can decrease energy usage by up to 75%!

Guards & Shields

Protect your exit signs, emergency lights and exit sign/emergency light combos with these sleek polycarbonate shields or durable wireguards. Especially useful for areas such as gymnasiums, schools and parking lots,these decorative yet sturdy guards and shields will keep your investment safe while not hampering their efficiency.

Accessories

Batteries

Bulbs / Lamps

Emergency Ballasts

LED Retrofit Kits

Guards & Shields