1. Product introduction
LED type low light intensity aviation obstacle light microcomputer chip control, automatic light control flash, there are three light sources to choose from, the light device using aluminum die-casting base, 122 mm polyacrylic acid Fresnel plastic lens, sunlight resistance, good anti-aging, beautiful appearance and good security, light weight, small size, is an economical and applicable beacon light device. The use of soft start slow change flash, greatly improving the visual effect.
There are two synchronous flashing control methods to choose from.
Ordinary type --------- adopts centralized control box to realize synchronous flashing of group lights
Intelligent --------- adopts synchronous line to realize synchronous flashing of group lights
Scope of application: 45m below the building alone, 45m above with medium and high light intensity with the use of
Small areas of high-rise, telecommunications tower, smoke tube, light mouth large machinery, construction sites, ships, roads
Second, the classification of low light intensity aviation obstacle lights
Low light intensity aviation obstacle lights for constant luminescence, red, peak light intensity greater than 32.5cd, only in the obstacle is lower than 45 meters to use alone, the obstacle is higher than 45 meters need to be used with the light intensity, high light intensity obstacle lights with, such as 45 meters above the building and facilities set up a multi-layer light intensity or high light intensity obstacle lights, in the light intensity or high light intensity obstacle lights can be set up between the obstacle lights.
A type or B type low light intensity obstacle lights to be illuminated; In addition to aircraft, in vehicles and moving objects must be set up C type low light intensity obstacle lights, in emergency and security vehicles show C type low light intensity obstacle lights must be issued blue flash, and in other vehicles show C type low light intensity obstacle lights must be issued yellow flash; In the "follow me" vehicle must be set up D type low light intensity obstacle lights.
Third, the choice of various light intensity obstacle lights: (H for the building height)
H < 45 meters, using low light intensity obstacle lights to use
45 m < H < 105 m, the use of light intensity obstacle lights with low light intensity use
105 m < H < 150 m, the use of light intensity A type obstacle light with the light intensity B type and low light intensity use H > 150 m, the use of high light intensity A type obstacle light with the use of low light intensity
For ultra-high wire towers, poles are used with high intensity B-type obstacle lights with low light intensity use
