Combination exit signs with emergency lights are all-in-one fixtures that mark exits and illuminate pathways to guide evacuations from buildings. They hardwire into an electrical system and automatically switch to their battery backup after a power loss to keep the exit sign lit and turn on the emergency lights. They can stay lit for at least 90 minutes. Emergency exit light combo units meet requirements for exit signs along an egress path, at doorways leading to exits, and at exits. They must be installed and regularly tested in accordance with local safety codes. Mounting them at the recommended spacing provides coverage to meet code-specific illumination levels along the path of egress and eliminate dark spots without overlighting. General purpose exit light combos install in dry, nonhazardous locations. Wet location exit light combos withstand exposure to water.
Plastic Exit Signs with Round Top-Mount Light Heads
These plastic exit sign and emergency light combos have round light heads mounted on top of the exit sign housing. They maintain a consistent look in installations with other round, top-mount light heads. Plastic units won't rust and are lightweight to ease installation. They are a cost-effective alternative to steel in areas where local codes don't require steel housings and where fixtures won't be subject to impacts or abuse.
Directional Indicators: Universal Field Selectable Chevrons
Voltage: 120/277 V AC
Plastic Exit Signs with Square Top-Mount Light Heads
These plastic exit sign and emergency light combos have square light heads mounted on top of the exit sign housing. They maintain a consistent look in installations with other square, top-mount light heads. Plastic units won't rust and are lightweight to ease installation. They are a cost-effective alternative to steel in areas where local codes don't require steel housings and where fixtures won't be subject to impacts or abuse.
Directional Indicators: Universal Field Selectable Chevrons
Voltage: 120/277 V AC
Plastic Exit Signs with Round Side-Mount Light Heads
These plastic exit sign and emergency light combos have round light heads mounted on the side of the exit sign housing. They maintain a consistent look in installations with other round, side-mount light heads. Plastic units won't rust and are lightweight to ease installation. They are a cost-effective alternative to steel in areas where local codes don't require steel housings and where fixtures won't be subject to impacts or abuse.
Directional Indicators: Universal Field Selectable Chevrons
Voltage: 120/277 V AC, 120/277 V
Plastic Exit Signs with Square Side-Mount Light Heads
These plastic exit sign and emergency light combos have square light heads mounted on the side of the exit sign housing. They maintain a consistent look in installations with other square, side-mount light heads. Plastic units won't rust and are lightweight to ease installation. They are a cost-effective alternative to steel in areas where local codes don't require steel housings and where fixtures won't be subject to impacts or abuse.
Directional Indicators: Universal Field Selectable Chevrons
Voltage: 120/277 V AC
Plastic Exit Signs with Round Bottom-Mount Light Heads
These plastic exit sign and emergency light combos have round light heads mounted on the bottom of the exit sign housing. They maintain a consistent look in installations with other round, bottom-mount light heads. Plastic units won't rust and are lightweight to ease installation. They are a cost-effective alternative to steel in areas where local codes don't require steel housings and where fixtures won't be subject to impacts or abuse.
Plastic Exit Signs with Linear Bottom-Mount Light Bars
Linear light bars integrated into the bottom of these plastic exit sign and emergency light combos create a sleeker, more contemporary look than round or square bug-eye light heads. They are commonly used in high-end commercial locations to upgrade from older fixtures. Plastic units won't rust and are lightweight to ease installation. They are a cost-effective alternative to steel in areas where local codes don't require steel housings and where fixtures won't be subject to impacts or abuse.
Steel Exit Signs with Round Top-Mount Light Heads
These steel exit sign and emergency light combos have round light heads mounted on top of the exit sign housing. They maintain a consistent look in installations with other round, top-mount light heads. Steel units withstand heavy-duty use in areas where fixtures may be subject to impacts or abuse. They are commonly used where local codes require steel housings. Combos that are Chicago or New York City approved meet specific city code requirements for housing materials, light output, letter color and size, and directional arrow/chevron color, size, and placement.
Directional Indicators: Universal Field Selectable Chevrons
Voltage: 120/277 V AC
Steel Exit Signs with Round Side-Mount Light Heads
These steel exit sign and emergency light combos have round light heads mounted on the side of the exit sign housing. They maintain a consistent look in installations with other round, side-mount light heads. Steel units withstand heavy-duty use in areas where fixtures may be subject to impacts or abuse. They are commonly used where local codes require steel housings. Combos that are Chicago or New York City approved meet specific city code requirements for housing materials, light output, letter color and size, and directional arrow/chevron color, size, and placement.
Directional Indicators: Universal Field Selectable Chevrons
Voltage: 120 V AC to 277 V AC
